background image

68

MAINTENANCE

Intake Filters

The intake foam filters limit snow 
ingestion into the intake system. 
When operating in loose powder 
snow, check the foam filters peri-
odically to remove any accumula-
tion of snow.

NOTICE:

Operating the snowmobile 
with the intake filters 
removed may cause carbu-
retor icing. The result will 
be poor fuel economy or 
carburetor malfunction. 
Always reinstall the intake 
filters before operating the 
snowmobile.

Variable Exhaust System (VES)

Maintenance of the VES is limited to a periodic inspection and cleaning 
of system components. Bring the machine to an authorized POLARIS 
dealer to have the VES disassembled, inspected and cleaned at the inter-
vals outlined in the maintenance charts beginning on page 59.

To ensure maximum performance and minimize required maintenance, 
follow the oil recommendations on page 49. The use of other lubricants 
may cause improper function of the valve mechanism and increase the 
frequency of required cleaning due to excessive build-up of carbon 
deposits.

Summary of Contents for 600 IQ Racer






























































































































Reviews: