manualshive.com logo in svg

Polaris 2015 RZR 900 XC Edition, Owner'S Manual, Page: 12 / 160

Share
Download
Polaris 2015 RZR 900 XC Edition Owner'S Manual Download Page 12

10

SAFETY

Safety Labels and Locations

Warning labels have been placed on the vehicle for your protection. 
Read and follow the instructions of the labels on the vehicle

 

carefully. If 

any of the labels depicted in this manual differ from the labels on your 
vehicle, always read and follow the instructions of the 

labels on the 

vehicle

.

If an informational or graphic label becomes illegible or comes off, 
contact your POLARIS dealer to purchase a replacement. Replacement 

safety

 labels are provided by POLARIS at no charge. The part number is 

printed on the label.

Proper Use Warning

WARNING

Require Proper Use of Your Vehicle
Do your part to prevent injuries:

• Do not allow careless or reckless driving.

• Make sure operators are 16 or older with a valid driver’s license.

• Do not let people drive or ride after using alcohol or drugs.

• Do not allow operation on public roads (unless designated for off-highway 

vehicle access) - collisions with cars and trucks can occur.

•

RZR/RZR S:

 Do not exceed seating capacity: 2 occupants.

•

RZR 4:

 Do not exceed seating capacity: 4 occupants.

Proper Use 

Warning

Seat Belt 

Warning

Drive 

Responsibly 

Warning

Max 

Payload 

Warning

Summary of Contents for 2015 RZR 900 XC Edition

































































































































































Reviews:

No comments