6
6.29
9924871 R03 - 2014 Polaris Sportsman® 570 EFI Service Manual
© Copyright 2013 Polaris Sales Inc.
Clutch Disassembly / Inspection
1.
Place
the
clutch
into
the
Universal
Clutch
Compressor Tool
PU-50518
. Press down on the top
of the spider assembly, pushing the spider onto the
shaft. Remove snap ring and slowly release the
assembly.
CAUTION
Wear eye protection when removing snap ring to
prevent serious personal injury.
2.
Remove snap ring retainer.
3.
Note the location of the spring and remove helix.
4.
Note the location of the spring in the moveable
sheave, and remove the spring.
5.
Check alignment of tabs on spring. Replace the
spring if tabs are misaligned or the spring coils are
distorted.
6.
Inspect ramp buttons in the moveable sheave and
replace if worn.
NOTE: The ramp buttons are secured by Torx™
screws (T20).
CLUTCHING
