Polaris 2002 Sportsman 6x6 Owner'S Manual Download Page 16

Page: 16 / 131

SAFETY

Safety Decals and Locations

NOTE:

Warning decals have been placed on the vehicle for your protection.

Read and follow the instructions on each decal carefully. In the event

any decal becomes illegible or comes off, contact your Polaris dealer

for a replacement. Any safety decal needing replacement will be

provided by Polaris at no charge. The part number is printed on the

decal.
The addition of certain accessories including, but not limited to:

mowers, blades, tires, sprayers, or large racks may change the handling

characteristics of this vehicle. Be certain any accessories added to this

vehicle have been approved by Polaris. Familiarize yourself with their

function and affect on the vehicle.

Summary of Contents for 2002 Sportsman 6x6




































































































































Search results

Summary of Contents for 2002 Sportsman 6x6

Reviews:

Related manuals for 2002 Sportsman 6x6

Brands by name

Popular brands

Polaris 2002 Sportsman 6x6, Owner'S Manual

Search results

Summary of Contents for 2002 Sportsman 6x6

Reviews:

Related manuals for 2002 Sportsman 6x6

Brands by name

Popular brands