19
1. Turn Verity Sense on by pressing the button.
2. Choose heart rate mode by pressing the button shortly until the LED next to the heart icon lights
up. When choosing the heart rate mode, the status LED on the side lights up blue.
3. After your choice, wait until all six LEDs light up. The sensor is then ready to measure your heart
rate.
4.
and start the session from your Polar watch or app.
After your training session, you can stop the recording from your Polar app or watch. Turn Verity Sense
off by pressing and holding the button until the lights are switched off. With the Polar Flow app, you'll
get an instant overview of your training straight after your session on your phone. If you used a Polar
watch, remember to sync your watch with the Flow app or web service to view the details of your
session.
TRAINING IN RECORDING MODE
Before you can record a training session with Polar Verity Sense, it needs to be registered
and linked to a Polar Flow account. This is done during the set up. For details, see
1. Turn Verity Sense on by pressing the button.
2. Choose recording mode by pressing the button shortly until the LED next to the arrow icon lights
up. When choosing the recording mode, the status LED on the side lights up green.
Summary of Contents for Verity Sense
Page 1: ...USER MANUAL...
