Polar Electro Polar3D, Manual, Page: 51 / 170

CHAPTER 2. START PRINTING 42
Figure 2.11: Build plate screen for
CalibrationKey
object
At the build plate screen, you may optionally make numerous
adjustments to the object; see Section 2.2.2 .
Once you are content with the planned object, click the “
PRINT
”
button (at the build plate screen’s upper right) to submit the
print job to the printer; this will automatically take you (after
possibly a minute or so with a blue swirling loading icon towards
the lower right of the screen) to the printer dashboard screen;
see Figure
2.16 .