CHAPTER 1. GET CONNECTED TO THE POLAR CLOUD
19
11. The printer is now connected and ready to
print! See Chapter
for an example of performing
a first print through the Polar Cloud!
Note that if you wish, you may use the Polar
Cloud printer management interface to change the
printer’s name and enter a longer text description
and location for the printer: perhaps describing the
printer’s location, its primary intended purpose, the
class for whose use it is intended,
etc.
; see Section
Printer settings: name, description, location,
of the
1.2
Connecting the Polar3D printer to the
Polar Cloud via Ethernet cable
Connecting the printer to your network via an Ethernet cable
is similar in functionality, from a Polar Cloud perspective, as a
wireless connection. The only difference is in the portability of
the printer, as with an Ethernet cable connection, the printer
will be physically connected to the network.
Perform
from Section
But instead of
from Section
, simply plug
in the Ethernet cable to both the printer, and to an Ethernet
jack for your local network. If the
POLAR
3D
LED lights on
the printer become blue over white, it indicates that your printer
has successfully connected to the Polar Cloud!
However, if the printer could not successfully connect to the
Polar Cloud, see Section
: you may need to enter a
