CHAPTER 1. GET CONNECTED TO THE POLAR CLOUD
8
Figure 1.4: Use the printer’s WiFi hotspot to connect to the printer’s web
interface
7.
Click the “
Add WiFi
” tab and choose the
WiFi network to which you would like to connect
the printer; see Figure
. You will need to tell
your printer the name of the local WiFi network
you wish to use, and (likely also) its password; see
Figure
. (At some sites, local networking may
require some additional configuration work here: if
you know that your site uses static IP addresses
or requires configuration assistance by the network
administrator to allow your printer’s MAC address
onto the local network or allow your printer access
to outgoing HTTP ports, this is the time to perform such steps:
see Section
. Also, please note that
network
access is
not
supported.)
Once you have configured the printer to know about your
