10
GET STARTED
SETTING UP YOUR WATCH
To wake up and charge your watch
, plug it into a powered USB port or a USB charger with the custom cable that came in
the box. The cable magnetically snaps into place. Please note that it may take a while for the charging animation to appear
on the display. We recommend that you charge the battery before you start using your watch. See
for detailed
information on charging the battery.
To set up your watch
, choose your language and preferred setup method. The watch gives you three options for setup:
Browse to the option most convenient for you with UP/DOWN and confirm your selection with OK.
A.
On your phone
: Mobile setup is convenient if you don't have access to a computer with a USB port, but it
might take longer. This method requires an Internet connection.
B.
On your computer
: Wired computer setup is quicker and you can charge your watch at the same time, but
you need a computer available. This method requires an internet connection.
The A and B options are recommended. You can fill in all the physical details required for
accurate training data at once. You can also choose language and get the latest firmware for
your watch.
C.
On your watch
: If you don't have a compatible mobile device and can't get to a computer with an internet
connection right away, you can start from the watch.
Please note that when you do the setup from the
watch, your watch is not yet connected with Polar Flow.
for your watch are available
only through Polar Flow.
To make sure you get to enjoy your watch and the unique Polar features at their
best, it’s important that you do the setup later in the Polar Flow web service or with the Polar Flow mobile app
by following the steps in option A or B.
OPTION A: SET UP WITH A MOBILE DEVICE AND POLAR FLOW APP
Please note that you have to do the pairing in the Flow app and
NOT in your mobile device’s Bluetooth
settings
.
1. Make sure your mobile device is connected to the internet and turn on Bluetooth.
2. Download the Polar Flow app from the App Store or Google Play on your mobile device.
3. Open the Flow app on your mobile device.
4. The Flow app recognizes your watch nearby and prompts you to start pairing it. Tap the Start button.
5. When the
Bluetooth Pairing Request
confirmation message appears on your mobile device, check that the code
shown on your mobile device matches the code shown on your watch.
Summary of Contents for Pacer Pro
