HP59/W
Handbook
SL 3.0
Air pressure controller
MAIN SETTING (Run Mode).
PRESSURE SETTING
Press SET (key lamp flashes): this message will be
displayed instead of the
° Set temperature value
Set Pression (mm H2o).
Press + or - to modify, press SET to escape.
INSTALLATION
Pressure range= 0 / 3mBar (0.0 / 30.0mmH20).
Maximum permissive pressure= 3mBar (30mmH20).
Operating temperature= 0 - 70°C
Waterproof= IP55
Example with
Set.P = 3.0
As it company policy to continually improve the products the Manufacturers
reserve the right to make any modifications thereto without prior notice.
They cannot be held liable for any damage due to malfunction.
020214
LINEA 230V
4
5
6
Uscita MAX
Uscita MIN
www.pola.it
How to connect the line
Connect 230V line on terminals L-N. Protect supply with adequate fuse.
3x0.5mmq section, L.max = 3 mt
HPAL contacts connection:
Contact relays are free voltage,
max
4 A M P A C 1, f u s e s
protection are 4A T H=35A.
IN= Ambient air input (pr).
OUT= External air input (pressure -).
OUT 0.5-4.5V
0-30 mm H20
230V LINE
HP59
IN
OUT
4
5
6
230V LINE
MAX Output
MIN Output
To obtain maximum precision of pressure control, place HP59/W in
vertical position.
