Setting a Zone Boundary
To set the boundary of a zone, use the POGO GPS. If you
are using the POGO without utilizing the optional POGO
Turf Pro cloud analytics system, boundary is not necessary
Tap the zone or slide your finger across the zone you wish
to set the boundary and choose ‘Edit’.
As you stand just
outside
of your targeted boundary, mark
your starting point and walk slowly around the perimeter
while tapping the ‘Get POGO GPS’ button about every 1 to
2 steps
Take your last GPS position about a step or two before
your first one, and tap ‘Save’ to commit that boundary
This process only needs to be done once. It will, however,
be overwritten if you decide to do that boundary again
(renovation, stronger GPS position, etc)
See further info on capturing the strongest GPS signal
Number of satellites (0-12).
Best performance when >8
