QUICK START GUIDE
1
Component and LCD Display
1
2
3
4
5
6
7
8
1 8
9
1 0
1 1
1 2
1 3
1 4
1 5
1 6
1 7
1
2
3
4
5
6
7
8
9
1 8
1 0
1 1
1 2
1 3
1 4
1 5
1 6
1 7
Internal Microphone
MENU
LED
SPEED
LCD
External Speaker
REC
USB/POWER Terminal
ERASE
Volume
＋
/
－
A B/Repeat
↔
HOLD
MODE
RESET
TIMER
LINE IN
SD/MMC Card Slot
Earphone Jack
2
Charging The Battery
3
Using a Memory Card
Please fully charge the battery
prior to using Radio YourWay LX.
The battery can be charged using
the AC adaptor, or by making
a USB connection with a PC or
MAC. It takes approximately
4hrs to fully charge the battery
using either method.
To Power on the unit, hold the PLAY button for 1-2 seconds.
☞
If the HOLD switch is in the ON position, all buttons are disabled and
the power on/off function will NOT work. In this case, slide the
HOLD switch off.
When inserting a
memory card
in the unit, carefully
insert the memory
card properly (as shown
in the diagram taking
note of the correct
side up) or you may
damage the card
and/or Ext card slot.
☞
You may need to format the memory card to the FAT file system prior
to using it. Please refer the user manual for more information.
LINE/MIC
PHONES
4
Setting Time
5
Setting Date
Press MENU & select SYSTEM using
◀▶
(left/right),next
select CALENDAR using
▲▼
(up/down) and push
▶
/
■
(PLAY).
You will now see a similar screen as the one shown below.
To move between the Year/Month/Date fields, use
▲▼
(up/down).
To change the Year/Month/Date, use
◀▶
(left/right). Push
▶
/
■
(PLAY) to
confirm when you are finished.
☞
In order for timer recordings to function properly, the correct time and
date MUST be set.
☞
Make sure you always have enough battery power. After 1 or 2 hours
of the battery being fully discharged the year/day/hour settings are all
lost and must be set again.
Press MENU & select SYSTEM using
◀▶
(left/right), next
select TIME SET using
▲▼
(up/down) and push
▶
/
■
(PLAY).
You will now see a similar screen as the one shown below.
To change the Hour/Minute,
use
▲▼
(up/down)
To move between the Hr/Min fields,
use
◀▶
(left/right). Push
▶
/
■
(PLAY)
to confirm when you are finished.
