PNI Finger 700, User Manual

Page: 36 / 396

User manual 31
9 Access Control Setting

Access control option is to set user's open door time zone, control lock and related device's parameters.
Press M/OK on the initial
interface.
Press to select Access control
and press OK.
Press
▼
to select Access Control
Options and press OK.
To unlock, the enrolled user must accord with the following conditions:
1. The current unlock time should be in the effective time of user time zone or group zone.
2. The group where user is must be in access control (or in the same access control with other group, to
open the door together).
The system default the new enrolled user as the first group, default group time zone as 1, access control
as the first group, and the new enrolled user is in unlock (if user has modified the related setting of
access control, the system will be changed with user's modification.)
9.1 Access Control Options
Set parameters to control locks and related device.
Door Lock Delay(s): Device control electronic lock is in enabling time.
（
effective value 1
～
10 seconds
）
Operation
Select Access Control Options
and press OK.
Enter to Access Control Options,
As shown in the figure.
Press
▲
/
▼
to move cursor to the item to be set. If it is the input box, press numeric keys on small keyboard
to input the value. If it is the roll box, press / to switch the values. After setting, press menu directly