14
4. Install front and back body:
First export the cable from the hole,put the axis,connect the lock front and
back panel with link cable through the hole, ensure plug correctly connect
with the back boby slot,then connect inside and outside with square
shaft,ensure the lock plate and the mortise connection are reliable,finally
screw the lock plate in the door.
5. Install the batteries in the battery pack comprtment
.
6
. After the installation completed,check if the basic function works is
necessary.
Test cylinder and power
Instert the emergency key and turn it to make the latch retracted, if the lock
shows blue light and one beep that is means the cylinder and power works
fine.
