Lubrication
Bearings lubrication
It is necessary to lubricate bearings regularly. For lubrication, you may not use pneumatic
lubrication press, that can damage the bearings. Use only manual lubrication press, lubricate
with only one or two strokes.
Maintenance-free bearings must not be lubricated.
Lubrication review
Pins on coulter arms
50 hr
Pins on axle and axels hydraulic cylinders
50 hr
Pins on disc marker arms
50 hr
Lubrication places review
Other lubrication places
Beside lubrication places listed in this manual, on machine there can be other places that
need lubrication. Typically, they are found near bearings and joints or other moving parts.
Check entire machine with focusing on places like this.
Position of lubrication point is usually shown on some part of the machine. In case of
multiple lubrication points, it is necessary to lubricate all of them.
Summary of Contents for Venga 400
Page 1: ......
Page 14: ...Machine description Venga...
