GETTING STARTED
Remove all components from the package. Items in the pack
include: – PMR Bluetooth headset with Ear Hook, Ear Cap, User
Guide, Lanyard (optional) & Mains Adapter. Please check the
contents carefully and contact your local dealer immediately if
there are any shortages.
GETTING
TO
KNOW
YOUR
HEADSET
Please note some models of headset will differ slightly in style and
the functionality may vary on certain models according to their
specifications.
Talk Button
Amber LED
Volume Up
Volume Down
CHARGING YOUR
HEADSET
Before using the headset, you must charge the headset for
approximately two hours. When fully charged, the battery
provides up to 5 hours of talk time and up to 100 hours of standby
time.
Please note talk time is also a function of the mobile phone
and factory determined settings of the phone so you may
find this figure is reduced under certain conditions.
To charge the headset
1.
Plug the AC adapter into the headset.
2.
Plug the AC adapter into a wall outlet. When the headset is
charging, the amber LED will light up.
3.
Unplug the charger cable from the wall outlet and the
headset when charging has finished, the amber LED will
turn off or be dim.
Battery Indication: The amber LED can turn off after 2/3 hours
charging. This will indicate that the Headset can be used,
however it is recommended that the user charges for a full 2
hours in order to fully charge the battery for normal operation.
PAIRING THE
HEADSET TO YOUR MOBILE PHONE
Pairing is the process of linking the headset
with your
Bluetooth
mobile phone. Before you use the PMR headset with your mobile
phone you must pair the devices. After this process is completed,
you can use the headset only with its paired mobile phone. If you
wish to use the headset with a different mobile phone, you must
repeat the pairing process with the new mobile phone. In this
case, the headset will no longer work with the original mobile
phone. Please refer to the user manual of your mobile phone for
further information on ‘How to Pair’.
Before you pair the headset, ensure that the battery is fully
charged and that your mobile is switched on and it is in
discoverable mode..
To pair the devices
1.
With the headset turned off, press and hold the TALK
button for five seconds.
The blue and amber LEDs will
flash alternately, and you will hear the PAIRING tone.
2.
Release the TALK button.
The headset is now in Pairing
Mode
.
3.
Turn on the mobile phone and place it within 10 feet of
the headset.
4.
Initiate the device discovery feature on the mobile phone.
Refer to the mobile phone user guide for instructions for
initiating this feature.
5.
When prompted by the mobile phone, enter the headset
pin code
0000
.
When pairing is complete, the blue LED
on the headset will flash at one-second intervals and the
headset will be placed in standby mode, ready to make
and receive calls. Please note if battery is low then
amber light not blue light will flash.
If disconnection or lost link occurs, it maybe due to the
following reasons:
a) The range is over 10 feet between both headset and
the mobile phone.
b) Mobile phone disconnected the link to conserve
power or enable other function.
c) Either device has been switched off.
Note: The headset, in normal operation, should maintain the
connection with the mobile phone at all times once the pairing
mode and connection has been established between the two
devices.
To cancel pairing mode -
While you are in pairing mode, you
can cancel the pairing process and turn off the headset.
Press and hold the TALK button for three seconds.
Both
LEDs will turn off and you will hear the OFF tone.
FITTING THE
HEADSET
ON YOUR EAR
The PMR Headset is designed to fit comfortably in your
ear. The ear hook can be rotated on its axis allowing you
to position on right or left ear. Please note the ear hook is
designed such that it can fit over the ear or under the ear
as well as right and left ear.
To place the headset on your ear -
Place the headset
speaker in your ear with the microphone angled towards
your mouth. The headset should fit snugly in your ear.
However, if the speaker is too small for your ear, you can
change to other size of the ear cap that is provided with
your headset.
To add the
ear cap -
Stretch the ear cap around the end
LED
PMR
BLUETOOTH HEADSET
P/N PBTFABH2C2-P,R,J,G
USER GUIDE
Blue LED
Declaration of Conformity
. We declare that product
PBTFABF2C2-P conforms to the R&TTE Directive
1999/5/RC .