manualshive.com logo in svg

PMI LIFE SAFETY ROPE, Manufacturer'S Instructions, Page: 18 / 44

Share
Download
PMI LIFE SAFETY ROPE Manufacturer'S Instructions Download Page 18

18

PMI

®

 TERMINATIONS

If the rope you purchased includes one or more PMI manufactured 

terminations, then this section titled “PMI Terminations” is the manufacturer’s 

instructions for those terminations. Please read this entire section for important 

safety information regarding PMI sewn and swaged rope terminations. Each 

termination has been carefully manufactured to meet the highest standards for 

life-safety products. Our terminations, whether sewn or swaged, are designed 

to provide you with a convenient attachment point for this rope product. 

Please carefully read and follow the following information regarding the use, 

inspection, maintenance, and retirement of this product.

TERMINATIONS CHARTS:

The NFPA class & ANSI compliance for terminations is only for Classic Pro 

EZ, Classic Pro EZ with Unicore®, and Extreme Pro™ rope. PMI can also sew 

terminations on Talon, Isostatic, Sport, Access Pro, Global Pro, and Max Wear 

ropes. Polyester ropes cannot be swaged.

ABOUT YOUR PMI

®

 TERMINATIONS

KT36025

or KT36026

Swaged eye with 12.5 mm PMI® Hudson Classic 

Pro with Unicore® Technology

42.0

General

Yes

KT36080

or KT36083

Compact sewn eye with 12.5 mm PMI® Hudson 

Classic Professional

43.3

General

Yes

Compact sewn eye with 12.5 mm PMI® Hudson 

Classic Pro with Unicore® Technology

42.1

General

Yes

KT36027

or KT36028

Swaged eye with 11.0 mm PMI® Hudson Classic 

Professional

31.1

Technical

Yes

KT36084

or KT36085

Compact sewn eye with 11.0 mm PMI® Hudson 

Classic Professional

29.3

Technical

Yes

Compact sewn eye with 11.0 mm PMI® Extreme 

Pro™ with Unicore®/Cevian with Unicore® 11.0 mm

38.6

Technical

Yes

KT36165

or KT36177

Compact sewn eye with 11.0 mm PMI® Extreme 

Pro™

36.3

Technical

Yes

KT36086

or KT36087

Compact sewn eye with 10.0 mm PMI® Hudson 

Classic Professional

28.0

Technical

N/A

Model

Description

Calculated 
MBS (kN)

Meets NFPA 
1983 (2017)

Meets ANSI 
Z359.15 (2014)

WARNINGS 

(cont.)

For any questions regarding your rope, please go to www.pmirope.

com, call PMI customer service at 1-888-764-1437 or e-mail at 

[email protected]. Thank you for purchasing PMI products!

WARNING

Summary of Contents for LIFE SAFETY ROPE













































Reviews:

No comments