RespiraSense
™
Instructions For Use
RespiraSense
™
PDS-801-007 Revision 2
Page
47
of
77
S
ECTION
5
–
C
ONFIGURATION AND
A
DVANCED
F
EATURES
This section outlines a number of configuration and advanced uses of the RR Monitor. These
procedures will not normally be used during the everyday usage of the product, but are of use in
troubleshooting and maintenance by trained personnel. For Troubleshooting solutions see
Section 6
–
Troubleshooting
. The majority of these items are interacted with through the Settings Menu. The
Settings Menu is password protected. When the Settings Menu is first accessed, the user will be
prompted to set up a new password.
Note
During normal operation, no internal adjustment or recalibration is required.
Accessing the Settings Menu
1.
Select the Settings Icon from the Dashboard.
2.
Enter Password.
3.
Press OK.
Note
In the event that the password is lost, the application must be reinstalled to reset
the password.
Set Default Thresholds
Selecting the Set Thresholds Option from the Settings Menu allows the user to alter the default
thresholds used in triggering the alarm on the Lobe. The default settings are the settings that will be
written to a new Lobe during the renaming process. The thresholds are for an upper and lower RR. If
the thresholds are equalled or exceeded, the alarm state will begin. Once set, the Save option records
the thresholds. Threshold limits on a RS Device in operation can also be altered by the user, see
Section
3
–
Patient Monitoring
for procedure.
The lobe lock setting allows a ward to be selected by default. All lobes registered to this iPad will be
automatically related to this Ward. When Lobe Lock is turned on only lobes relating to this ward will
be shown on
the dashboard. Selection of default settings will be confirmed when ‘OK’ is selected.
