0507347110/160114/B SHIELD fire safety solutions (5k1)
| USER | EN - 24
17.1 ShieldControl fire detection panel
17.1.1 Keys
The ShieldControl panel comes with a set of 2 keys to lock and
unlock the panel.
Main controls
17.2 Manual call point
When a fire is detected, the fire detection and suppression
system can be activated manually through the manual call
point.
•
The manual call point comes with a separate key.
To activate the manual call point, proceed as follows.
•
Use the
PUSH
and
PULL
handle as indicated.
17.2.1 Reset
To reset the activation handle of the manual call point, proceed
as follows.
•
Unlock and open box using the key.
•
Place switch in initial
STANDBY
position (down).
•
Relock the box.
17
OPERATION
To avoid improper use, the keys should be stored
securely during normal operation of the system.
How to:
Do this:
Display:
Comments:
Test lamps.
Push 2 top
buttons.
All LEDs and
display will
illuminate for
one second.
Panel is in normal
conditions.
Reset alarm
condition.
Determine
cause e.g. fire
and only push
SYSTEM RESET
after cause
has been
settled.
Panel will go
to normal and
display will
show
SYSTEM
OK
.
Program switch in
RUN
. This action will
undo any alarm
immediately.
Silence alarm
sounder.
Push
SIGNAL
SILENCE
.
LED
OUTPUT
1
will go out.
Only silence alarm
when cause has
been determined
and appropriate
actions or warnings
are given.
Reset trouble
condition
POWER
TROUBLE
or
SYSTEM TROUBLE
.
Determine the
cause and
remove e.g.
open circuit or
resolve low
battery
voltage.
When trouble
is removed
indicator will
automatically
return to
normal.
Silence trouble
buzzer.
Press button
SIGNAL SILENCE
.
Only silence alarm
when cause has
been determined
and appropriate
actions or warnings
are given.
Go to normal
standby
position.
Switch to
position
RUN
.
Display shows
SYSTEM OK
and
power LED is
green.
System is now in
operation.
Store the key separately from the manual call point to
prevent improper use.
• Dual
Action
•
Screw Terminal Connections
•
DC and AC Voltage Contact R
•
Gold Plated Alarm Contacts
•
Surface or Weatherproof Bac
•
Deeper Back-Boxes Availab
Space for Wire and/or Addres
Features
