0000101887/010920/B KUA-160
2
PREFACE
Using this manual
This manual is intended to be used as a work of reference for
professional, well trained and authorised users to be able to
safely install, use, maintain and repair the product mentioned
on the cover of this document.
Pictograms and symbols
The following pictograms and symbols are used in this manual:
TIP
Suggestions and recommendations to simplify
carrying out tasks and actions.
ATTENTION
A remark with additional information for the user. A
remark brings possible problems to the user’s
attention.
CAUTION!
Procedures, if not carried out with the necessary
caution, could damage the product, the workshop or
the environment.
WARNING!
Procedures which, if not carried out with the
necessary caution, may damage the product or
cause serious personal injury.
WARNING!
Fire hazard! Important warning to prevent fire.
WARNING!
Explosion hazard! Important warning to prevent
explosions.
Personal protective equipment (PPE)
Instruction to use respiratory protection when you
do service, maintenance and repair jobs, as well as
during functional testing. We recommend to use a
half-face respirator according to EN 149:2001 +
A1:2009, classe FFP3 (Directive 89/686/EEC).
Personal protective equipment (PPE)
Instruction to use protective gloves when you do
service, maintenance and repair jobs.
Text indicators
Listings indicated by “-” (hyphen) concern enumerations.
Listings indicated by “•” (bullet point) describe steps to
perform.
1
INTRODUCTION
1.1
Identification of the product
The identification plate contains, among other
things, the following data:
- product name
- serial number
1.2
General description
The KUA-160 is an extraction arm with an external middle
hinge. The removable hood has a safety mesh. The arm is
fitted with a control valve and is 360° rotatable
1
. The hood is
90° movable in four directions.
The KUA-160 arm is available in four different types:
- type
H
: for hanging mounting (wall bracket included)
- type
S
: for standing mounting (e.g. on a mobile unit)
- type
ATEX
: approved for use in explosive environments
Zone 22; marking EX II 3D (for hanging mounting only)
2
1.
KUA-160 ATEX: 359° rotatable due to the litz wire
2. In accordance with TRGS 727 & ATEX Directive 2014/34/EU
- type
H-D
: for hanging mounting, with sealed shut-off valve
1.3
Options and accessories
FlowGuard
Airflow sensor
KUA-160 all types (except for ATEX versions)
S-100
Manual on/off switch for hood mounting
LL-5.5/24-160
Manual on/off switch, incl. LED working light
1.4
Product combinations
You can use the KUA-160 with the following products:
1.4.1 KUA-160/2H | 3H | 4H (incl. ATEX versions)
FUA-1800
0,55 kW (0.75 HP)
Extraction fan
FUA-2100
0,75 kW (1 HP)
PA-110/160
1,1 m (3½ ft)
Stanchion
PA-220/160
2,2 m (7 ft)
FM-15/160
1,5 m (5 ft)
Extension crane
(type FlexMax)
FM-25/160
2,5 m (8¼ ft)
FM-35/160
3,5 m (11½ ft)
FM-45/160
4,5 m (15 ft)
ERC
Extraction rail
SLE-30
3 m (9¾ ft)
Extension hose
1.4.2 KUA-160/2S | 3S | 4S
MobileGo
Mobile welding fume extractor
MobilePro
PA-110/160
1,1 m (3½ ft)
Stanchion [+ additional
wall bracket, art. no
0000101537]
PA-220/160
2,2 m (7 ft)
1.5
Technical specifications
Physical dimensions and properties
Length:
- KUA-160/2
- KUA-160/3
- KUA-160/4
- 2 m (6½ ft)
- 3 m (9¾ ft)
- 4 m (13 ft)
Diameter:
- tubes
- hood opening
- Ø 160 mm (6¼ in.)
- Ø 300 mm (12¾ in.)
Material of tubes
aluminium
Material of hoses:
- type
H
and
S
- type
ATEX
- PVC with spring steel wire
- polyethylene with copper
coated spring steel wire
Weight:
- KUA-160/2
- KUA-160/3
- KUA-160/4
- wall bracket (
H
types)
- 14 kg (31 lbs)
- 15 kg (33 lbs)
- 17 kg (37½ lbs)
- 4 kg (9 lbs)
Performance
Recommended airflow
-
min. airflow
800-1200 m³/h (470-710 CFM)
800 m³/h (470 CFM)
1.6
Working reach
1.7
Pressure drop
