130519/A ControlPro | Short user manual
EN - 9
2.2.3 FAN CONTROL status window
The Homescreen shows statuses of the fan control. The statuses refer to actual settings
and timers of the fan. It depends on these settings, which information appears on the
Homescreen.
Fig. 2.5 Fan control status window
Possible icons and buttons on the fan control status window:
Icon
Fan | Status
Additional info
On
On
Delayed stop in: #min. #s
The fan runs during set delay time after
the external start/stop signal drops
Opening sliding valves #s
SHIELD only; the fan starts after the
valves are fully opened
Ramping down #s
Off
Interrupted
Fan is stopped manually, while the
weekly timer or external start signal is
active
Icon
Fan trigger
Additional info
Enabled (black):
fan manually triggered
Disabled (grey):
not active
When more triggers control the fan, the
manual trigger will be disabled. When the
fan is stopped (or paused) manually, the
icon remains active until the fan stops
working.
Enabled (black):
external start/stop input
signal trigger
Disabled (grey):
not active
The icon is only active when enabled in
the Settings menu.
The triggers External and Timer can be
active at the same time, when both
triggers are finished the fan will be
stopped.
Enabled (black):
timer (weekly / overtime /
extra) trigger
Disabled (grey):
not active
Icon
Weekly timer | Status
Additional info
Stop: (dd) hr:min
Fan: On
Next start: (dd) hr:min
Fan: Off
Overruled by external signal
Fan: On
Interrupted
Next start: (dd) hr:min
Fan: Off
Fan is stopped manually, while the
weekly timer is active
Holiday until dd:mm:yy
Fan: On
Extra timer active
Stop: (dd) hr:min
Fan: On
Extra timer active
Interrupted
Next start (dd) hr:min
Fan: Off
Fan is stopped manually, while the
weekly timer is active
Extra timer active
Overruled by external signal
Fan: On
