130519/A ControlPro | Short user manual
EN - 14
4
SYSTEM SETTINGS
The Settings menu provides options to change (default or factory) settings for the Fan
control and Filter cleaning. The ControlPro was set up by the manufacturer with the
default values. Additional specific settings were made in the
Installation Wizard during
commissioning of the system.
To avoid unintentional changes the Settings menu is PIN protected.
Select this icon on the Homescreen
Enter PIN
The Settings menu consists of 5 sub-menus.
Fig. 4.1 Settings menu
From the Settings menu, you can go to a sub-menu in two different ways:
-
select the menu button on the left, subsequently select the sub-menu
- type the sub-menu number on the numeric keyboard on the right side of the status
window
!
Most setting are fixed and must
not
be changed, unless the system
configuration has changed.
!
To prevent unauthorized actions on the Homescreen
, an option is to lock the
Homescreen with an extra password. Refer to section 4.5.
4.1 Fan settings |
menu 2
The Fan menu consist of three sub-menus in which you can set timer options for the fan;
- 2.1 Weekly timer fan; refer to section 4.1.1
- 2.2 Fan control
4
- 2.3 External start/stop signal; refer to section 4.3
A brief summary on the left side of the status window shows some of the actual settings
of the current menu.
Fig. 4.2 Fan menu
4
The type of fan control is already set in the Installation Wizard
