BITalino R-IoT
User Manual
BR 20200207
19 of 42
6
Wi-Fi and Computer setup
As explained above, the R-IoT can work as out-of-the-shelf product when it is acquired
with our TP-Link Wi-Fi router which have been pre-configured to work together.
The R-IoT can operate on both a local network and over the internet if necessary. As
already mentioned above, the R-IoT will be sending data to its DEST IP (destination IP
address), identified in the field of the configuration web page,
, which is by
default 192.168.1.100.
Therefore, a local network must be created using the AP router, and the proper
destination address set on the computer.
6.1
Change Computer IP
On
MacOS
, go to the system preferences then network preferences. Select the Wi-Fi
connection and connect to
Wi-Fi (riot)
instead of your home Wi-Fi router; change the IP
address method to "manually" and set it to 192.168.1.100. Set the network mask to
255.255.255.0.
Figure 4-1
–
Change IP MacOS
