Using the software
When you use the MonitorPlux software for the first time, you need to associate the software with the
device being used for monitoring.
First use
When MonitorPlus is used for the first time, you need to define the device that is being used to collect data.
To do this, after opening the program, click on the Monitor Plux Set up toolbar icon, or click on “File”
followed by “Settings...”.
A window will appear allowing you to enter the MAC address indicated on the card.
Alternatively, you can search for the device by clicking on “Find Devices”. After a few seconds, a list of
MAC addresses will appear and you can select your device. The minimum sampling rate is 36Hz and the
maximum is 1000Hz. The resolution can be from 8 to 12 bits.
Note: Ensure that the bioPLUXresearch device is switched on when you use the “Find Devices” option.
17/33