1
Q
UICK
G
UIDE
Information
Please refer to the complete “user’s guide” on the installation disc to guide you
through any question you may have while using the NVR.
Install a Hard Disk
Attention
Please make sure the following items are ready before you proceed:
3.5” hard disk
Screwdriver with Philips tip
For XPRESS series
1. Remove the screws securing the cover of the device.
2. Remove the cover of the device.
3. Connect the SATA data cable and the power cable to the hard disk.
4. Place the hard disk into the hard disk bracket.
5. Mount the hard disk to the hard disk bracket using the provided screws.
6. Put the cover back on the device and then tighten the screws.
