32
Hard Disk
For XPRESS Series
Go to the “Setup” page and click on “Recording”, “Hard Disk” tab to check the size,
status and usage of the hard disk.
If you want to format the hard disk, you can click on the “Format” button. Please note
that all the data on the hard disk will be permanently deleted.
For XPERT Series
If you have 2 hard disks installed, you can click on the “Format(RAID 0)” or
“Format(RAID 1)” button to create RAID 0 or 1 system respectively.
RAID 0 uses data striping to create one large volume, high performance virtual drive.
However if one hard disk fails, all data will be lost.
RAID 1 uses data mirroring to create redundancy, where data on both hard disks will
be identical. The system will continue to function even if one hard disk fails.
Event
Channel
In the event settings menu, you may configure the event the IP Camera responds to
and the output reaction the IP Camera will trigger.
Add an event
1. Go to the “Setup” page and click on “Event”, “Channel” tab to enter the event
settings page.
2. Select the desired “Channel” from the drop-down list.
3. Click the “Add” button to enter Event Wizard page.
