Page 13/68
3.2 Preparing for a measurement
After setting date and time, the start screen is displayed every time the device is switched on.
Screenshot 2: Start screen (plusoptiX A12C)
Buttons (1) and (2) are highlighted in orange to show that a binocular measurement is being
performed. To perform a monocular measurement, touch buttons (1) or (2). Buttons (3) and (4)
are not shown by plusoptiX A12R.
You can start a anonymous measurement by pressing the Shutter (see chapter 3.4 "Starting a
measurement and positioning the camera").
The plusoptiX A12C possesses a patient database. To enter new patient data (see chapter 3.3
"Entering patient data"), or to call up patient data that has already been saved (see chapter
4.1.8 "Retrieve patients from database"), touch button (3) to move to patient data entry.
1)
2)
3)
4)