Plus NF-20, User Manual, Page: 40 / 54

E-40
Using USB Memory
The content of what has been drawn on the sheet surface of the NETWORK FLIPCHART can be saved in USB
memory. Later, the saved image can be read into a personal computer and made into a document of the pro-
ceedings of the meeting, or affixed to a document.
Notice
• No USB flash memory device is included. When purchasing a USB flash memory device, pay attention to the following:
1. USB flash memory devices formatted in FAT16/FAT32 are supported. USB flash memory devices in NTFS format cannot
be used.
2. USB flash memory devices protected by a security function cannot be used.
3. USB memory devices with multiple drives or partitions cannot be used.
USB Memory Storage Procedure
Preparation:
Check that the NETWORK FLIPCHART’s AC power plug is connected to a wall power outlet.
Press the ON/Standby button and switch on the power.
Note
• When turning on the power, wait about 5 seconds or more after the power
plug has been connected before pressing the ON/Standby button.
• Press the ON/Standby button to switch on the power. The LED of the
display window will light.
Connecting a USB memory stick to the USB memory
port of the main device
Notice
• Check the orientation of the USB mem-
ory stick first before connecting it. When
inserted forcefully in a wrong orientation,
the USB port and USB memory may be
damaged.
• Be careful not to bump into the USB
memory device with hand or body while
it is mounted. Doing so could damage the
USB memory device or USB A Memory
port.
The procedure for displaying the sheet surface you want to store is the same as
for printing.
See “Basic Printing Operation” on page E-45.
Note
• Saving of the portion located around the sheet surface might not be pos-
sible. Please see “Effective reading size” on Page E-5.
Press the Scroll/Stop button to display the screen to be
stored.
Model name: NF-20
continued on next page