Plus NF-20, User Manual

Page: 19 / 54

E-19
Making Detailed Settings (via LAN)
Use this procedure to make the NETWORK FLIPCHART device settings (“CB Setup”), network settings, etc., with the NETWORK
FLIPCHART connected to a local area network (hereafter referred to as “LAN” or “the network”) using a computer’s web browser.
Access authority is required to make the detailed settings. There are three levels of authority – “administrator authority”, “file list
browsing authority” and “no authority”, and the selectable menu items (some setting items) are restricted accordingly. Register the
administrator and users at “User Setting” on page E-25.
Table of Menu Items and Access Authority Levels
Menu Item Some Setting Items Administrator Authority File List Browsing
Authority
No Authority
CB Setup
• • •
Board File List Preview and Download
• •
—
Delete • — —
Header/Footer • • •
Administrator
Menu Network Setting
•
— —
User Setting
•
— —
Security Setting
•
— —
Disk management Setting • — —
CB Information
• • •
• mark: Accessible : — mark: Not accessible
* When the “Delete User Image Data” security setting is set to “Valid”, deleting is possible with file list browsing authority.
Notice
• When connecting the NETWORK FLIPCHART to the network, be sure to consult the network administrator before making
the settings.
Note
• Depending on the network being used, the display speed and button response may be slow and operations may not be
performed. If this happens, consult your network administrator. Also, the NETWORK FLIPCHART may not respond if but-
tons are operated successively. In this case, wait awhile then operate again. If there is no response after a while, turn off the
NETWORK FLIPCHART’s power, then turn the power back on.
• If the top screen does not display with a web browser, press the [Ctrl] + [F5] keys to refresh the web browser’s screen.
• The NETWORK FLIPCHART uses JavaScript and cookies. Set the web browser so that these functions will operate.
• The NETWORK FLIPCHART performs automatic page reading (redirecting). Set the web browser so that this function will
operate.
Basic Setting Operations
Here we explain how to display and close the settings screens, using the Internet Explorer web browser as an example.
Preparations:
1. Use a LAN cable to connect the NETWORK FLIPCHART’s LAN terminal to the LAN port on the switching hub.
2. Turn on the NETWORK FLIPCHART’s power.
*
Launch the web browser on the computer con-
nected to the network.
“Page cannot be displayed” may in some cases appear, but simply
continue to the next step.
CB Setup and Network Setting Procedure
continued on next page