Re-imagine Beyond Technology
4.
INSTALLATION OVERVIEW
1)
Initial Setup by Web Browser
All Plura monitors should be shipped with the latest versions of firmware/software, but in the
case where an update is needed, follow the appropriate steps below. Each update is applied
using the Control LAN 2 UI. The Media LAN 2110 Control (out-band) is also accessed via the
Control LAN 2 UI. Follow the instructions below to access this interface.
We recommend
Chrome an
d Firefox browsers for control on
Windows.
2)
Connecting to the Control LAN 2 User Interface “UI”
●
Plug in the Ethernet cable to the Control LAN 2 on the back of the monitor.
●
Power on the unit and wait for the “PLEASE WAIT EMBER+ BOARD IS BOOTING”
message to go away (Figure
4)
Figure 4. Ember+ Board Booting
●
On your Plura monitor, press the “Menu” button. Select “Setup”
→
“Advanced”
→
“Network Config2” to find the IP address of the Ember+ board (Figure
5).
Operating Instructions
SFP-25G SERIES
10
