Functional Description and Specifications RUB VM
Page 25
4.3
“Functions“
Click on
Functions
to see all applicable tabs/pages listed, and to activate or deactivate
tabs/pages.
For example (screen shot of the PC program tab):
A tab/page reflects a function of the module. The columns
Edit
and
Use
determine whether
the function in the module is activated/deactivated and whether user configuration of that
specific function is allowed or not.
Click on the applicable
Edit
and/or
Use
check boxes to activate/deactivate a function:
Edit
Use
Function is deactivated, the tab/page is not visible.
Function is activated, the tab/page is visible and configurable.
Function is activated but the tab/page not visible and therefore not
configurable.
•
We suggest that you deactivate the
Use
check boxes of all functions you are presently
not using.
•
We suggest that you deactivate the
Edit
check boxes of all functions you are presently
not configuring. That avoids unintentional operating and malfunctions.
List of tabs/functions:
Profile
Store and Load Configurations on the Module (*)
System
Identification, Reset, SNMP, Fan Control
Keys
Keys, Lamps and LEDs
Distribution
Set-Up the Changeover and Alarm Characteristics
(*) refer to “Installation & Systems Manual RUBIDIUM SERIES”
