Plum eSTER x40, Installation And Operating Manual, Page: 8 / 20

8
After this time, the thermostat switches
to the mode in which it worked before
turning on the "Party" mode.
• Out of house (text information on 3rd
item of the main screen) – the preset
temperature is set single time to the
"Night" temperature (
P06 ), for the
duration time ( P12 ) of the of the "Out of
house" mode, which appears for editing:
After this time, the thermostat switches
to the mode in which it worked before
turning on the "Out of house" mode.
Useful mode when the user leaves the
heated room.
9.3. Edition of the schedules
Holding and buttons for 2 seconds
will enter the user menu. Select the user
menu item (
P01 ) with the word " Sch " and
press button.
The flashing line indicates the edited day,
where: 1 - means Monday, 2 - Tuesday, 3 -
Wednesday, etc. With the or buttons
we can change the day of the week. After
pressing the button, we enter the
programming of intervals on that day.
The first time interval lights up, which is
expressed by the beginning of the interval:
00:00 (which means the interval 00.00-
00.30). The second interval is 00:30 (which
means the interval 00.30-01: 00). Use or
buttons to move between intervals (48
intervals, every 0.5 h). For each interval, the
preset temperature "Night" or "Day" can be
set. The button assigns the night or day
temperature for a given interval. The moon
represents the preset night temperature,
whereas the sun - the preset day
temperature. Save / exit follows after holding
button for 2 seconds.
Example:
00:00
00:30
01:00
01:30
……...
05:30
06:00
06:30
07:00
……...
21:30
22:00
22:30
23:00
23:30
By default, all time intervals throughout the
week are set according to the above
example. The intervals can also be edited
from the main controller.
9.4. Copying of the intervals
Holding both and buttons at the
same time for 2 seconds will enter the user
menu. Select the user menu (
P02 ) item with
the word " cPy " and press the button.
The flashing line indicates the reference day
to be copied to other days, where: 1 -
Monday, 2 - Tuesday, 3 - Wednesday, etc.
By or buttons we can change it. After
accepting with button, the reference day
stops flashing and the day to which the
pattern is to be pasted begins to flash. You
can select several days to fill with the
pattern, but you can’t change the reference
day anymore. Confirm, save and exit by
holding button for 3 seconds.