PLUM AUDIO –
RO’VED
Firmware version: 1.1
Thanks for purchasing RO’VED from Plum Audio!
RO'VED is a
1U MACRO OSCILLATOR
based on the legendary "Plaits" by Mutable Instruments.
We are very proud to present an improved interface which provides the best of the 1U format, fueled
by custom firmware which makes using the interface natural and convenient.
This document is a module specific addendum that reviews the interface and the custom firmware
features of
RO'VED
. If you wish to read more about the synthesis engines, please refer to the manual of
Plaits on the official Mutable Instruments website.
Installation Instructions:
●
RO’VED
is made according to the
Intellijel 1U standard
and should only be installed in cases that
support the
Intellijel 1U standard
.
●
Before connecting
RO’VED
, make sure to
turn off your case’s power supply
.
●
Connect one side of the supplied ribbon cable to the power header of
RO’VED
and the other
side to your case's power bus board.
The red stripe of the ribbon cable (-12V side) must be oriented to the same side as the “Red
Stripe” marking on the header.
●
Use the 4 supplied screws to mount
RO’VED
to a free 28HP space in the 1U row of your
Eurorack case.
Power Supply Requirements:
●
RO’VED
requires a
-12V/+12V
power supply (2x5 pin connector).
●
RO’VED
draws
55mA
from the
+12V
rail and
8mA
from the
-12V
rail.