background image

1

Installer's

Reference Guide

PLS-ML1200

Electromagnetic Lock

Power-up turns on the electromagnet, which is attracted to
the steel armature plate, which is mounted on a door,
holding the door fast against unauthorized entry.  When
power is turned off, the electromagnet releases the armature
plate, allowing the door to open.

TECHNICAL SPECIFICATIONS

PLS-ML1200

Power
Magnet Size
Armature Size
Holding Force
Current Drain
Voltage Tolerance
Housing Material
Operating Temperature Limits
Weight

12VDC / 24VDC
10.5 x 1.625 x 2.625 in. (268 x 42 x 67 mm)
7.25 x 0.625 x 2.375 in. (185 x 16 x 61 mm)
1200 lb. (545kg)
500mA @ 12VDC; 250mA @ 24VDC
± 10%
Aluminum
14° ~ 131°F (-10° ~ 55°C)
11 lb. (5.0kg)

Function Overview

Jamb

Door

Ar

matur

e

Maglock

L-bracket

Summary of Contents for PLS-ML1200

Page 1: ...romagnet releases the armature plate allowing the door to open TECHNICAL SPECIFICATIONS PLS ML1200 Power Magnet Size Armature Size Holding Force Current Drain Voltage Tolerance Housing Material Operating Temperature Limits Weight 12VDC 24VDC 10 5 x 1 625 x 2 625 in 268 x 42 x 67 mm 7 25 x 0 625 x 2 375 in 185 x 16 x 61 mm 1200 lb 545kg 500mA 12VDC 250mA 24VDC 10 Aluminum 14 131 F 10 55 C 11 lb 5 0...

Page 2: ... 123456789 123456789 123456789 123456789 123456789 123456789 123456789 123456789 123456789 123456789 123456789 123456789 123456789 123456789 123456789 123456789 123456789 123456789 123456789 1234 1234 1234 1234 1234 1234 1234 1234 1234 1234 1234 1234 1234 1234 1234 1234 1234 1234 12345678 12345678 12345 12345 Sexnut tube Sexnut bolt This side drill 16mm only Drill an 8mm hole thru door Armature Sc...

Page 3: ...apping screws in the slotted holes of the mounting plate and adjust the position of the mounting plate so that it and the armature plate form a 90 degree angle B Once the position is correct use the long self tapping screws to permanently mount the bracket C Remove the two short screws IV Drill the cable access hole V Mount the electromagnet to the door frame fig 1 Use the Allen wrench to screw th...

Page 4: ...en Door releases only after a delay Possible causes No power Electromagnet and armature plate are not making good close contact Incorrect voltage setting A secondary diode was installed across the electromagnet Solutions Check to make sure the wires are securely tightened to the terminal block Check that the power supply is connected and operating Make sure the lock switch is wired correctly Make ...

Reviews: