15
DIGITAL AUDIO PLAYER
sure the RCA connectors are a snug fit and are inserted all the way in. For XLR
connection, make sure you connect the RIGHT XLR output and LEFT XLR output of
the Toko to the right and left inputs of your preamplifier respectively. Also make sure
the XLR connectors click into place.
NOTE: DO NOT connect XLR and RCA at the same time, use only one or the other.
TERMINATION QUALITY
Quality of the connections must be examined to ensure that high-performance,
trouble-free operation is enjoyed. Check that all interconnection cables are snug
fitting and inserted all the way in. In the case of balanced XLR sockets, ensure that
they click in positively.
CONNECTING THE MAINS SUPPLY
Firstly, check that the mains supply voltage printed on the rear of this unit is similar to
the mains supply voltage in your area. If in doubt, please consult your Plinius dealer.
Mains supply power connection is via the plug-in lead supplied with your Plinius Toko
Digital Audio Player.
Where possible, check the wall outlet is switched OFF, then connect the local mains
plug end of the lead to the wall outlet. Check the unit is switched OFF, and connect
the IEC end of the cable to the IEC socket at the back of the Toko. With the cord fully
connected, switch the wall outlet ON. Now that your Toko is configured correctly,
switch the power switch on the rear panel to ON. The display LED will cycle in
brightness as the internal circuitry stabilises. You can now enjoy your new Plinius Toko
Digital Audio Player.
NOTE: This unit must be connected to a mains socket outlet with a protective earthing
connection. The wall outlet socket or mains switch must be accessible at all times in
case of emergency.
WARM-UP PERIOD
You will find that the Plinius Toko will become noticeably ‘purer’ in sound after being
on for a period of time. We usually recommend waiting at least 24 hours before
expecting the best quality of sound reproduction.
TOKO OUTPUTS
PREAMPLIFIER LINE INPUT
