Adjusting Volume Limit
The Radio Pack is capable of adjusting a minimum and maximum volume limit for each conference assignment.
Adjust your Radio Pack volume limit using these steps:
Figure 24
Adjusting Volume Limits
Minimum Volume
1. Press and hold the RP Menu button for 2 seconds; then, use the far-right volume knob to scroll and select
User
Settings
. Press F2 (
ENT
).
2. Scroll and select
Min Volume
. The current minimum settings for each volume knob will be displayed on the
right-hand side. Press F2 (
ENT
) to view a list of available setting options.
3. Turn each corresponding volume knob to increase or decrease the volume level to your desired limit within a
range of 0 to 19 with 0 being OFF. This range corresponds to a range from OFF (-57 dB) to +3 dB.
4. Press F2 (
SAVE
). Once saved, the screen will return to the previous menu.
Maximum Volume
1. Press and hold the RP Menu button for 2 seconds; then, use the far-right volume knob to scroll and select
User
Settings
. Press F2 (
ENT
).
2. Scroll and select
Max Volume
. The current minimum settings for each volume knob will be displayed on the
right-hand side. Press F2 (
ENT
) to view a list of available setting options.
3. Turn each corresponding volume knob to increase or decrease the volume level to your desired limit within a
range of 1 to 20. This range corresponds to a range from -53 dB to +6 dB.
4. Press F2 (
SAVE
). Once saved, the screen will return to the previous menu.
Operation - 42
Summary of Contents for CrewCom CRP-44-2400
Page 1: ...Radio Pack OPERATING MANUAL...
Page 2: ...ii...
Page 38: ...Figure 15 CRP 44 Top View Setup and Installation 31...
