4
3
2
1
Overview
Installation and pairing
Start by charging the battery with the included USB cable. Use a free USB port on your
computer or a USB charger (5 V, 300 mA). The battery is fully charged when the battery
indicator turns off. A flashing light indicates that the battery needs charging.
The USB-receiver is located underneath the keyboard. Insert it in a free USB-port on
your computer. Turn on the keyboard using the power switch. Your computer should
automatically detect new hardware and install the necessary drivers. Press and hold
the F1 (RF) key until the communication indicator stops flashing to pair the keyboard
and the receiver. Your Mediatrack Edge is now ready for use. If the keyboard loses its
connection to the receiver you may have to pair the units again.
If the Mediatrack Edge is left unused for 30 minutes, it will enter sleep mode in order
to save battery power. Press any key to wake it up.
1
2 Plexgear®
Plexgear® 3
2
3
4
Touchpad LED:s
1
Communication indicator
2
Battery indicator.
3
Caps Lock indicator.
4
Touchpad lock indicator.
Contents
Keyboard
USB receiver
USB charging cable (microB)
Manual
Specifications:
Key stroke:
2.5 mm
Size keyboard:
295 x 91 x 11 mm
Weight keyboard:
240 g
Connection:
USB
Batteries:
Integrated
Frequency:
2.4 GHz
Range:
Up to 10 m
The touchpad moves the mouse cursor and also has the following functions:
1
One-finger tap equals a left mouse button click.
2
Two-finger tap equals a right mouse button click.
3
Follow the dotted line on the right side to scroll.
4
Pinch to zoom in or out.
To lock or unlock the touchpad, slide in the direction of the arrow.
A three-finger tap equals a middle mouse button click.
1
2
4
3
1
2
3
4
Touchpad gestures
5
5
6
6
Summary of Contents for Mediatrack Edge
Page 1: ......