Pleion EGO 110, Installation And User Manual

Page: 13 / 67

Installation and user handbook – rev.0.4 of 23.02.2017
13
Always position a thermostatic mixer valve between the system outlet and the
domestic water user (see HYDRAULIC CONNECTION chapter).
In general, do not touch the transport pipes or the hydraulic connections and the internal
accumulation tanks while the system is operating.
Should it be necessary to empty the system while it contains hot water:
- do not discharge directly onto the roof or into the ground;
- use a flexible hose to safely lead the water to a drain.
PROTECTION AGAINST LIGHTNING
Pursuant to the Directive EN 62305 1-4, the
EGO”
solar collector with
integrated storage must not be connected to the protection system used by the building
against lightning, unless indicated otherwise by local laws in force.
Have a technician or skilled electrician check the installation area for this
possibility.
All metal structures that are present, therefore also the supporting structure and fixing
shafts of the system, must have the same electric potential as the building. It is therefore
good practise to prepare suitable earthing for the metal parts of the system.
This can be done by a skilled electrician and the evaluation of the equipotentiality level
evaluated by a skilled electrical engineer.