ASSEMBLY:
Here are the easy-to-follow instructions for assembling your
GO, DiEGO, GO! SiT ‘N SPiN toy. Please follow assembly
instructions in proper order for best results.
1
.
Connect the right side and left side
of the center post by snapping the
two pieces together. This is a one-
time assembly.
2.
Use a Phillips
/
cross head
screwdriver (not included)
and 2 screws (included) to
connect the turn handle
to the top of the center
post. The screws connect
on the sides of the turn
handle as shown.
3.
Place the center
post
/
turn handle into
the SIT ‘N SPIN base as
shown. Flip the SIT ‘N
SPIN base over and
use a Phillips
/
cross
head screwdriver
and
1
screw
(included)
to connect
the center
post
/
turn
handle to
the base.
NOW YOU’RE READY TO PLAY!
Note:
Check to be sure that
all assembled parts
are securely attached
before using the toy.
2a.
2b.
Note:
For best performance,
child should be seated
on one of the two
designated seating
areas marked with the
yellow star.
seating areas
Your child can keep the fun spinning as he hears music
and fun phrases or animal sounds! Here are some play
suggestions to get you started:
PLAY FEATURES:
2.
1
.
Push the moon-shaped button on the top of the SIT ‘N SPIN base or spin the base
to start Diego’s theme song and hear fun phrases. You may press the moon-shaped
button on the top of the SIT ‘N SPIN base to switch to animal sounds, or you may
continue spinning and the toy will automatically make the switch.
Music and Fun Phrases
Diego will encourage your child to help him rescue the rainforest animals with each
revolution on the SIT ‘N SPIN. Your child can follow along in English and Spanish!
Animal Sounds
Your child will hear lots of rainforest animal sounds while spinning!
2.
After several seconds of inactivity, the toy will automatically shut off. To play again,
simply spin the base or press the moon-shaped button. When storing, make sure
the three-position switch on the bottom of the toy is moved to “Off” position to
conserve battery life.
1
.
Press Here
NOTE:
This toy is packaged in “Demo” mode. To enable full play features, change to “Play”
mode located on the underside of the toy. This toy also features a sounds-off mode for
quiet play! Simply move the switch at the bottom of the toy to “Off.”
PLAY
OFF DEMO
