STEP #34:
1. FASTEN THE SWING BEAM PLATE TO THE SWING BEAM
SUPPORT WITH TWO 5” CARRAIGE BOLTS AND ½”
WASHERS FROM THE TOP AND 3/8” WASHERS AND
LOCKNUTS ON THE BOTTOM.
2. PLACE THE SWING BEAM SUPPORT ACROSS THE MIDDLE
AND REAR CORNER POST. ONE SIDE OF THE SUPPORT
SHOULD REST ON TOP OF THE PORCH TOP SIDE BOARD.
3. MAKE SURE THAT THE SWINGBEAM SUPPORT IS LEVEL.
USE A 3/8” DRILL BIT TO INSERT THROUGH THE PRE-
DRILLED HOLES ON THE SUPPORT AND INTO THE CORNER
POST.
4. FASTEN THE SWING BEAM SUPPORT TO THE CORNER POST
FROM THE INSIDE WITH 6 ½” CARRAIGE BOLTS AND ½”
WASHERS AND 3/8” WASHERS AND LOCKNUTS ON THE
OUTSIDE.
Summary of Contents for COLOSSAL TAHOE
Page 1: ...COLOSSAL TAHOE...
