Page
1
of
4
Product Name:
Round Bubble Tube 6
’
/ 180cm
Specification:
Required:
Product Code:
BT180
Size: H180cm Dia15cm
Approximately 27 Litres of Distilled Water
Weight: 16kg without water 38kg weight with water.
Material: Tube: Acrylic Base: Stainless Steel
LED: 12 non
–
replaceable multi coloured LEDs
Bulb Rating: 12V/ 1W
Input: 230
–
240V
Output: 12Vac
–
1800mA
Contents:
1.
Tube
2.
Lid
3.
Base
4.
Air pump
5.
12v adapter
6.
Remote Control
8.
Plastic Air Tubing
9.
Fish
10.
Manual Pump
11.
Water pipe
WARNING!
•
Contains sequences of flashing lights may affect individuals who are susceptible to photosensitive epilepsy or other photosensitivities.
•
This item is to be installed by a competent, experienced installer only, assistant of competent adult maybe required when assembling.
•
This product is not a toy, to be used under adult supervision only.
Safety Warnings:
•
Before you start, please read these instructions carefully and retain for future reference. Check the contents inside the packaging and ensure you
have all the required parts listed and there are no missing parts. If any parts are missing
DO NOT
attempt to assemble the product.
•
Before setting up, ensure the product is not damaged. If any part of the product is damaged, do not attempt to assemble and use.
•
Remove all packaging before setup. Do not operate in packaging.
•
Do not attempt to hardwire this product to the mains electrical supply. This product does not require to be connected to your mains electrical supply.
It operates using a transformer.
•
Only use the transformer supplied with this product and no other transformer must be used.
•
This product contains non-replaceable LEDs. If any of the LEDs cease functioning, the whole unit must be disposed of according to your local council
guidelines.
•
This is not a toy. Contains small parts, potentially may cause choking hazard. Water pipe and wires could potentially be a risk of strangulation.
•
Keep away from heat sources or naked flame, keep away from children and pets during assembly and when not in use.
•
Ensure cable is placed such that no trip, entanglement or strangulations hazards are likely to occur.
•
Place the tube where it cannot be knocked over. It is recommended to secure the tube to a solid wall with a bubble tube bracket (sold separately)
using correct fasteners for your wall type.
•
DO NOT
use live fish in this tube.
•
DO NOT
attempt to move the product when filled with water or when plugged to the mains.
•
ALWAYS
disconnect from the mains when cleaning or changing the water.
•
This product contains moving parts, some noise and vibration is expected.
•
Persons (including children) with reduced physical, sensory and mental capacities, or lack of experience and knowledge, MUST BE supervised by a
competent person responsible for their safety.
•
Although the unit has been designed for use by people with special needs, however this does NOT mean it is unbreakable. Responsible person MUST
ensure that unit is not hit with anything and that no one pulls or pushes the unit.
Instructions
1)
Before you start, please read these instructions carefully and retain for future reference.
2)
Carefully unpack the product, remove the contents and lay them out on a cardboard or other protective surface to avoid damage. Ensure all contents
listed are present before setting up.
3)
As this product is not required to be hardwired, an adaptor is connected, therefore ensure a plug socket is within reachable distance, without
stretching the wire too much.
4)
Place the base on a flat surface in a position where you can access the back of the opening to the base.
5)
Unscrew the 3 screws on the plate on the back of the base. Place the round metal disc and screws in a safe place, as this will be required later.
6)
Insert the tube (1) into the top of the base, take care not to trap any pipes.
5-6 Agecroft Trading Estate, Langley Road, Salford Manchester M6 6JD
Tel
: +44 161 737 5099
Website
Help & Support
