Plasson EF Saddle for
Large Diameter Pipes
Installation Instructions
G l o b a l P r e s e n c e - L o c a l C o m m i t m e n t
Clean the pipe. Do not remove the saddle from
the bag.
Place the bag with the saddle on the pipe,
Mark the saddle boundaries on the pipe and
a short line adjacent to the terminal pin,
marking the centerline of the saddle..
Add lines on pipe inside the marked boundaries,
then, scrape pipe fully inside perimeter until the
lines are fully removed.
2
1
Use only Plasson clamping tool for large saddles 280-710mm cat no. 4-4700-006
