Plasma Screenland, Instruction Manual

Page: 17 / 20

Appendix
Plasma Screenland 04/07 17
En
Menu overview
Note:
The menus disappear again after approx. 7 seconds. Modified settings are accepted and saved automatically. Pressing
the menu button 34 repeatedly displays the different menus available.
Note:
Pressing the "0" button from the numerical buttons 36 always opens the selection menu for the signal source. Set the
TV Box, YCbCr, VGA or DVI signal source here.
TV mode
Button Menu Parameter Value Description
13 Display of the signal source
33 Image mild/standard/bright Preset picture settings
34 Picture Brightness -
No function
Contrast - No function
Colour - No function
Tone - No function
Sharpness - No function
Temperature Warm/cold Adjust with button 31 (Vol-/Vol+)
34 System Standard Auto/PAL/NTSC3.58/NTSC4.43/SECAM Country-specific standard TV setting
Sound mode -
No function
Language - OSD language setting
Clock "--:--" Time in "hh:mm" format
Time on "--:--" Switch-on time
Time off "--:--" Time off
YCbCr mode
Button Menu Parameter Value Description
13 Status display top right:
VGA resolution; horizontal freq.;
vertical freq.
33 Image mild/standard/bright/personal Preset picture settings
34 Picture Brightness
Adjust with button 31 (Vol-/Vol+)
Contrast Adjust with button 31 (Vol-/Vol+)
Colour Adjust with button 31 (Vol-/Vol+)
Tone - No function
Sharpness
Adjust with button 31 (Vol-/Vol+)
Temperature Warm/cold Adjust with button 31 (Vol-/Vol+)
34 System Standard - No function
Sound mode - No function
Language
Clock "--:--" Time in "hh:mm" format
Time on "--:--" Switch-on time
Time off "--:--" Time off
28 Format 4:3/Zoom/Decoder/16:9 Setting for the picture format