Plasma Ions PS-501TW, Manual

Page: 1 / 2

PlasmaIons
Product Installation Instructions
1.Checking the product before install.plug in the power to test the equipment,
If damaged in transit, please contact customer service in time
2.This product should not be installed in the air temperature more than 60°,
preferably in a well-ventilated position.
【
InstallationNotes
】
（ 1 ） Punching installation steps ：
Label position Punch Expansion rubber plug
4.Screw the expansion
plugWire, set aside 5 mm
5. Plug in the power
cord first.
6.Then hang the product
on the wall.
Do not run out of screws
Hang on the wall
Plug in the power cord
（ 2 ）Disassembly cleaning steps:
1.Mark the location of
the hole punch. 2.Percussion drilling,
hole diameter 6mm. 3.Put the rubber plug.
1. Lock the equipment on
both sides of the product
Open with a wildcard key.
2. Open the lid after
unlocking,See the
internal structure. 3. When you need to
clean the filter, straight
Just pull the filter up
Come up.
【
Technical speci fication
】
WarrantyCard
（Please keep it properly）
Product
Name
Purchase
Time
Product
Number
Contact
Number
Customer
information
Name/company
contact address
Sales company stamp：
425 mm
255 mm
External timer, remote control, APP,
primary filter (cleanable), high-efficiency filter
【 Optional accessories 】
Model
Voltage
Power
Air volume
Weight
Noise
Ion tube
quantity
Size
PS-501T W
2
50~1 0 0 m
≤50 dB
490 *1 25 * 342 mm
7 7 W
200 m³/h
9 . 0 Kg
1 （ Standard ）
350 mm( 14 . 0 inch ）
Filter type Ion tube life
Primary/high efficiency
filter (optional)
Sheel
Meternal
Stainless steel
Ion tube size
Plasma Air Disinfection Purifier
Pleasereadtheinstructionsbeforeuse
Model : PS-50 1 T W
Application
Area
17000 Hours
120V AC / 240V AC