PS-500T1
Plasma Ions
Warranty Card
（
Please keep it properly
）
Product
Name
Purchase
Time
Product
Number
Contact
Number
Customer
information
Name/company
contact address
Sales company stamp：
（2）Punching Installation Steps:：
1.
Mounting tape
2. Stick it on the back
of the product.
3.
More than 3 PCS
.
4.Aim horizontally at the wall
and press firmly
5.Plug in the power adapter
and connect the plug to the
power input.
6
.
The working light is on
and the machine is working
to sterilization
1.
Mark the location of the
hole before installation.
2
.
Drill aperture of 6mm
holes at the marked
position.
3.Put the expansion plug
into the hole position.
Label position
Punch
Expansion rubber plug
4.
Using the key open the
machine then you
’
ll see
the mounting screw hole
5.Using the screwdriver tool,
attach the product to the wall.
6.Plug in the power adapter
and connect the power input.
Open the front cover
打开
Power on
Screw on
There are two ways of installation: perforation installation and no hole installation.
Perforation installation is suitable for the walls can make screw holes.
and no hole installation for smooth metal walls.(Like in the elevator, most of them belong
to the non-punching installation mode, this is be selected by the user according to the
installation environment)
（1）No punching steps：
Installation Notes
Plasma air disinfection purifier
Please read the instructions before use
120mm
225mm
