The mobile phone station comprises three devices: 1) the base 2) the headset
3) your phone. The base and headset are already paired if purchased
together. To use the base with your phone, pair your phone to the base.
The base can pair with up to 8 Bluetooth devices, maintaining 1 active connection.
1
To pair your mobile phone to the base, place your phone on the charge pad and press the "Pair"
softkey.
NOTE
To pair a another Bluetooth device or to pair your phone again, go to Settings > Bluetooth >
Devices > Add New.
2
Go to Bluetooth settings on your mobile phone/Bluetooth device and select
Poly Elara 60 Series
.
Follow the on-screen directions to finish pairing.
TIP
If you have trouble pairing/connecting, forget prior Elara connections in your device's Bluetooth
settings and retry.
Pairing your headset to the base only needs to be done if your headset and mobile base station
were purchased separately or if you need to pair the headset to the base again.
1
To pair your headset to the base, use the base softkeys to go to
Settings
>
Bluetooth
>
Headset
Pairing
>
Add New
.
2
Put your headset in pair mode by pressing and holding the power button towards the Bluetooth
icon until you hear "pairing" and the headset LEDs flash red and blue.
3
Press
Next
and follow the on-screen instructions.
OPTIONAL
If you want to continue a call or streaming audio on your headset away from the range
of the base, you can also pair your phone to the headset.
1
Press and hold the headset Power button towards the Bluetooth icon until you hear “pairing” and
the headset LEDs flash red and blue.
2
Go to Bluetooth settings on your mobile phone and select
PLT Focus
. Once successfully paired,
you hear “pairing successful” and the LEDs stop flashing.
3
Use your phone’s menu to switch the audio from the base to the headset if you want to walk away
from the base and keep using your headset.
Pair
Pair your phone
Pair your headset to the
base
OPTIONAL Dual pair your
headset
4
