Planmeca Sovereign Classic, User Manual

Page: 77 / 298

13.3 Control panel on Flexy-holder
The control panel on the Flexy-holder is used for controlling the dental unit
and the chair.
1. Chair buttons
2. Unit buttons
3. Flexy button
You can program the function behind the Flexy button. Depending on what
has been programmed, you can do one of the following by pressing the
Flexy button:
•
activate/deactivate the intraoral scanner
• drive the chair to the rinsing position (default)
• lock/unlock the touch display
• turn the suction on/off
• turn the operating light’s composite mode on/off (short press) or adjust
its intensity (long press)
• activate/deactivate the apex locator
• change the light tone of the operating light
• turn Planmeca Solanna Vision video streaming on/off
• start/stop Planmeca Solanna Vision video recording
• capture an image with the Planmeca Solanna Vision camera
• open/close the Planmeca Solanna Vision window.
NOTE
When you are not signed in to the dental unit and the
Sign in window is
displayed, pressing the Flexy button signs you in as a guest user. This
function can not be programmed.
For programming instructions, see section "Flexy button functions" on page
198.
To open the Flexy function window and check which function is programmed
to the Flexy button, press Suction holder at the top of the control panel.
13 Control panel
User's manual Planmeca Sovereign Classic 67