Planmeca Sovereign Classic, User Manual

Page: 41 / 298

CAUTION
Make sure that you attach the intraoral scanner connector the right way into
the port for the scanner. If the connector is turned the wrong way, it will not
go into the port. Use of unnecessary force will break the connector.
NOTE
There are two ports on the cuspidor. Make sure you attach the connector to
the port marked "Planmeca specified USB device only".
NOTE
To avoid splashes on the scanner, remove it from the dental unit after use
and place it on the table stand.
For more information about the intraoral scanner, see Planmeca FIT user’s
manual.
8.13 Zeiss OPMI pico microscope
The Zeiss OPMI pico dental microscope can be mounted to the dental unit
pylon.
CAUTION
Do not drive the chair when a patient is under the microscope.
NOTE
The Planmeca Intra X-ray unit and the Zeiss OPMI pico dental microscope
can not simultaneously be attached to the dental unit.
For more information about Zeiss OPMI pico, see the manufacturer’s own
documentation.
8 Planmeca Sovereign Classic dental unit
User's manual Planmeca Sovereign Classic 31