Planmeca Sovereign Classic, User Manual

Page: 201 / 298

26.8 Planmeca Solanna and Planmeca Solanna Vision operating lights
26.8.1 Intensity
About this task
NOTE
The light intensity can also be adjusted from the operating light, see sections
"Adjusting intensity of operating light" on page 124 and "Adjusting intensity
of operating light in composite mode" on page 125.
When you have signed in to the dental unit with your own user name, all
changes you make to the light mode settings and then save, are saved to
your user profile. This means that whenever you sign in to the dental unit,
you will use your last saved light mode settings.
Steps
1. Press Program.
2. Press Operating light or Composite mode. Both buttons open the same
pop-up window.
3. Open the
Intensity tab.
4. Adjust the intensity of the operating light or the composite mode.
The active foot control icon shows which value can be
adjusted by pushing the foot control pedal to the left or
right. To activate the inactive value, press down the foot
control pedal or press the plus (+) or minus (-) button of
the inactive value.
26 Programming
User's manual Planmeca Sovereign Classic 191