Planmeca Sovereign Classic, User Manual

Page: 157 / 298

• You use the micromotor in slot 1 to modify the settings of preset 4 and
save them. You move the micromotor to slot 2. Slot 2 does not recognise
the micromotor and loads preset 1 for the instrument. When you select
preset 4, it will contain the settings you modified when the micromotor
was in slot 1.
24.2.2 Handpiece selection
CAUTION
Before using a handpiece, ensure that you have selected the correct
handpiece from the control panel AND that the selected handpiece matches
the handpiece that you are going to use.
NOTE
The handpiece can only be selected for the Implantmed surgical micromotor.
When the Morita TORX micromotor is used, pressing the Handpiece button
only displays the current handpiece, but no selection can be made.
The selected handpiece is displayed on the control panel once you have
activated the instrument.
If the displayed handpiece does not correspond to the used handpiece,
press Handpiece. This opens a new window where you can select the
correct handpiece.
Press on the correct handpiece to select it. The window closes and the
instrument settings and the handpiece information on the control panel
change accordingly. To close the window without selecting a handpiece,
press Close.
24 Operating instruments
User's manual Planmeca Sovereign Classic 147